G Service PowerMarine & Industrial Power☎ +44 7951 632187
ComAp Part No. ID-FLX-LITE · In stock

ComAp InteliDrive Lite Genset Control Panel ID-FLX-LITE

The ComAp ID-FLX-LITE is a genuine InteliDrive Lite Genset Control Panel. G Service Power has this unit new surplus, unused, in stock in the UK at £800, ready for next-day worldwide dispatch. Call +44 7951 632187.

ComAp InteliDrive Lite Genset Control Panel ID-FLX-LITE

Actual unit photographs. Further photos and video on request.

Specification

Part number (MPN)ID-FLX-LITE
ManufacturerComAp
ProductInteliDrive Lite Genset Control Panel
Controller modelComAp New InteliDrive Lite, HW 1.6 (label barcode 15038338)
Woodward modelWoodward DPG-2201-002 Rev. D, serial 20109058
Removed fromCummins 6BT marine generator set, never commissioned
Controller supply8–36 V DC (12 V or 24 V systems)
Inputs / outputs7 binary in · 7 binary out (0.5 A) · 9 analogue in · magnetic pickup
CommunicationCAN bus, J1939 ECU support · ComAp LiteEdit configuration
GovernorIsochronous or 0–10% droop · 9–30 V DC · 7 A actuator output
EnclosureLockable steel wall-mount, rotary isolator, harness socket, rocker switch
IncludesPanel, both controllers, engine wiring harness with multi-pin plug
ConditionNew surplus — installed, never commissioned, removed; no box
LocationUK — ready to ship worldwide
ConditionNew surplus
AvailabilityIn stock — next-day worldwide dispatch
Price£800 ex works UK, excl. VAT
ReferenceGX-ID-FLX-LITE

Compatibility

The ComAp ID-FLX-LITE fits Single-engine installations mechanical (magnetic pickup) or electronic (J1939 ECU / Cummins Modbus), Generator sets, pumps, compressors and fire pumps with a Woodward DYNA, APECS or EPG actuator and Cummins 6BT marine generator set. Related part numbers: DPG-2201-002 (kit component, Woodward), DPG-2201-001 (related part (same system), Woodward), ID-Lite (related part (same system), ComAp) and 2990-01-582-2619 (related part (same system), NSN).

Compatible engines

MakeModelNotes
Single-engine installationsmechanical (magnetic pickup) or electronic (J1939 ECU / Cummins Modbus)ComAp datasheet; ECU library covers Caterpillar, Cummins, Deutz, John Deere, MAN, MTU, Perkins, Scania, Volvo Penta and others
Generator sets, pumps, compressors and fire pumpswith a Woodward DYNA, APECS or EPG actuatorComAp positions InteliDrive Lite as the controller for pumps and compressors; Woodward manual 36523 says the DPG-2201 is used primarily on generator sets
Cummins6BT marine generator setprovenance only — the set this panel was removed from, unused

Interchangeable & related part numbers

Part numberBrandRelationNotes
DPG-2201-002WoodwardKit componentdigital speed controller fitted inside the panel; Woodward manual 36523
DPG-2201-001WoodwardRelated part (same system)same family; -002 adds the flywheel-teeth parameter so speeds read in rpm and allows droop calibration by PC
ID-LiteComApRelated part (same system)the earlier-generation InteliDrive Lite that ID-FLX-LITE (New InteliDrive Lite) replaced
2990-01-582-2619NSNRelated part (same system)NATO stock number for the Woodward DPG-2201-002

ComAp has discontinued ID-FLX-LITE (now called InteliDrive FLX Lite; last firmware 2.5, July 2023) and names no direct successor, so this is a like-for-like spare. Confirm your engine is mechanical with a pickup or has a J1939 ECU in ComAp's library, and that the Woodward DPG-2201-002 suits your actuator (DYNA / APECS / EPG) and 9–30 V DC system. Fitment and interchange data is compiled from manufacturer catalogues and cross-reference listings and can change at engine serial-number breaks. Quote your engine serial number and existing part number when you call and we will confirm before dispatch.

About this part

The ComAp InteliDrive Lite Genset Control Panel — part number ID-FLX-LITE is a genuine ComAp part, supplied at £800 by G Service Power. It is new surplus, held in UK stock and dispatched next day, worldwide.

Complete pre-wired engine control panel built around the ComAp InteliDrive Lite controller, order code ID-FLX-LITE, with a Woodward DPG-2201-002 digital speed controller mounted inside — the controller label reads New InteliDrive Lite, HW 1.6, and the Woodward unit DPG-2201-002 Rev. D (see photos). It was fitted to a Cummins 6BT marine generator set that never entered service and was removed before commissioning. ComAp has since discontinued the ID-FLX-LITE with no direct successor, so this is a like-for-like spare. The InteliDrive Lite starts, stops, monitors and protects a single engine, reading speed from a magnetic pickup or a J1939 ECU, and is configured with ComAp LiteEdit for mechanical or electronic engines on generators, pumps or compressors; 8–36 V DC supply, IP65 front. The Woodward DPG-2201-002 is an isochronous or droop (0–10%) governor for electric actuators, 9–30 V DC, 7 A output. The lockable steel enclosure carries the door-mounted controller, rotary isolator and harness socket, and the matching engine harness with multi-pin plug is included. Actuator, pickup, sensors and software are not. Condition: new surplus — installed but never commissioned, no original box; it needs ComAp configuration and Woodward speed settings for your engine. Price £800. Please confirm against your engine model, serial number and actuator before ordering. In UK stock — call +44 7951 632187 or message on WhatsApp for shipping and availability.

Compatibility: fits Single-engine installations mechanical (magnetic pickup) or electronic (J1939 ECU / Cummins Modbus), Generator sets, pumps, compressors and fire pumps with a Woodward DYNA, APECS or EPG actuator and Cummins 6BT marine generator set — the full list of engines and interchangeable part numbers is on the Compatibility tab. Confirm against your engine serial number before ordering, or call us and we will check it with you.

Part number & references

For sale from UK stock. Quote any of these references when you call.

Part numberID-FLX-LITE — also listed as IDFLXLITE, Woodward ID-FLX-LITE
BrandComAp — also sold under Woodward
Controller modelComAp New InteliDrive Lite, HW 1.6

Frequently asked questions

Which engines does the ComAp ID-FLX-LITE fit?
It fits Single-engine installations mechanical (magnetic pickup) or electronic (J1939 ECU / Cummins Modbus), Generator sets, pumps, compressors and fire pumps with a Woodward DYNA, APECS or EPG actuator and Cummins 6BT marine generator set. ComAp has discontinued ID-FLX-LITE (now called InteliDrive FLX Lite; last firmware 2.5, July 2023) and names no direct successor, so this is a like-for-like spare. Confirm your engine is mechanical with a pickup or has a J1939 ECU in ComAp's library, and that the Woodward DPG-2201-002 suits your actuator (DYNA / APECS / EPG) and 9–30 V DC system. Fitment can change at engine serial-number breaks, so quote your engine serial number when you call and we will confirm it.
Which part numbers are interchangeable with ID-FLX-LITE?
The related numbers are DPG-2201-002 (kit component, Woodward), DPG-2201-001 (related part (same system), Woodward), ID-Lite (related part (same system), ComAp) and 2990-01-582-2619 (related part (same system), NSN). The Compatibility tab states each number's relation to this part — a supersession or cross-reference is the same part or its direct replacement; a marking or kit number is not a separate part.
What is the ComAp ID-FLX-LITE?
Complete pre-wired engine control panel built around the ComAp InteliDrive Lite controller, order code ID-FLX-LITE, with a Woodward DPG-2201-002 digital speed controller mounted inside — the controller label reads New InteliDrive Lite, HW 1.6, and the Woodward unit DPG-2201-002 Rev.
Is the ID-FLX-LITE new or used?
This unit is new surplus, supplied from UK stock.
How much is it and how do I buy it?
£800 ex works UK, excl. VAT. Call G Service Power on +44 7951 632187 or message on WhatsApp.
Do you ship worldwide?
Yes. In-stock items are dispatched next day and shipped worldwide with export packing and documentation.